The CasaConnect KNX Central Unit is a control unit for the KNX building bus system. The graphic touch screen and the integrated automatic functions allow easy central setting and operation of the technical equipment installed in the building. The basic configuration is carried out via the ETS.

KNX control with access to the participants in the KNX building bus system
Color touch display 10.1-inch, for manual operation, system set up and or setting the basic and automatic functions, Network connection by LAN or WLAN, Browser for viewing websites, etc., Remote access via network for system setup, diagnostics, etc. Approval by the user required, Slide show from SD card as screen saver, Integrated loudspeaker (4 tweeters, 1 broadband speaker).

Elsner TOUCH SCREN FOR HARSH ENVIRONMENTS – ROBUST AND EASY TO USE, Even in harsh environments with dirt and moisture, more than function counts.

The Fabro KNX operating, and display panel is suitable for harsh environments and outdoor use. A robust aluminum housing protects the 7-inch real glass display. The 8 areas per display side are kept extra-large for easy operation. Each area can be used as a button or display. There are over 100 symbols to choose from, next to which a value or color is displayed. Objects from 1 bit (switching) to 14 bytes (texts) can be transmitted. On 5 pages, the user thus has up to 40 input and output options.

The Windancer KNX(-GPS) weather station for the KNX building bus system measures temperature, wind speed, brightness and detects precipitation. All values can be used to control limit-dependent switching outputs. The states can be linked via AND logic gates and OR logic gates.

The Windancer KNX-GPS model additionally receives the GPS signal for time and location and calculates the exact position of the sun (azimuth and elevation). The integrated shading control allows the intelligent control of the sun protection of up to eight façades.

The Sensor Intra-Sewi KNX TH-L-Pr for the KNX building bus system captures brightness and the presence of persons in rooms. The Sensor Intra-Sewi KNX TH-L-Pr additionally measures the temperature and the air humidity and calculates the dewpoint. Via the bus, the indoor sensor can receive external values of temperature and humidity and process them further with its own data to a total value (mixed value, e.g. room average). Integrated PI-controllers control ventilation (humidification/dehumidification according to humidity) and heating/cooling (according to temperature).

Jardana controls irrigation for plants The water flow is time-controlled via four valves for four zones. The settings for the irrigation are set using the Jardana App on an WLAN device. By installing optional Elsner TMi moisture sensors in the soil, the irrigation can react to rain if a ground moisture sensor is placed outside the irrigation zone. or react to the ground moisture in the individual zones if one sensor is placed per zone. Jardana is KNX-compatible and can therefore be integrated into the KNX building bus system.

The TMi sensor measures the temperature and moisture content of the soil. The sensor is intended for communication with the Jardana irrigation controller and cannot be used with other systems.