If a colored accent lighting is in the foreground of the application, the installation of the RGB stripes is recommended. All color entries are carried out quickly and precisely.
The fields of application for the RGB stripe are almost infinite. Color accents create an individual mood for every room that can be changed flexibly. This creates fascinating lighting effects that remain in your memory forever.
Each color (red, green, blue) can be controlled separately and is therefore suitable for use with any PWM dimmer based on 24V.
There is a 3M adhesive tape on the back of the LED stripe to facilitate assembly on site. The flexible stripes can be effortlessly cut with scissors, at the designated places, and reused later with a new feed.
– Event applications
– doctor’s practices
– furniture luminaire
– Private residential
– Shop lighting
– separate control of the color channels
– continuously variable mixing of the individual colors
– versatile applications
– to 0.1% dimmable with PWM
Operating voltage: 24 V DC
Max. Power consumption: 18 W / m
Luminous flux: 550 lm / m
Beam angle: 120 degrees
dimmable: yes, up to 0.1% with corresponding PWM dimmers
Number of LEDs per segment: 6
division: 58.8 mm
Operating temperature: -20 degrees Celsius to +60 degrees Celsius
Storage temperature: – 20 degrees Celsius to +60 degrees Celsius Degree of
Dimensions: 5000 x 8 x 4 mm
Recommended power supplies :
24V constant voltage with the highest possible efficiency. Eg Meanwell HLG series.
NOTE: LED Strip must be fed in from both sides and used with a heat sink!
No guarantee for overheating due to insufficient cooling. It must be ensured that a suitable cooling surface is available.