If a colored accent lighting is in the foreground of the application, the installation of the RGBWW-Stripes is recommended. All color entries are carried out quickly and precisely.
What is unique about this stripe is that the RGB channels and the WW channel are combined in one LED chip.
The fields of application for the RGBWW stripe are almost infinite. Color accents create an individual mood for every room that can be changed flexibly. This creates fascinating lighting effects that remain in your memory forever.
Each color (red, green, blue, warm white) can be controlled separately and is therefore suitable for use with any PWM dimmer based on 24V. With different color mixtures, a cool white (approx. 7000K) can also be represented. Thus a color temperature spectrum from 2850 – 7000K can be covered, as well as a continuous mixing of the individual colors.
There is a 3M adhesive tape on the back of the LED stripe to facilitate assembly on site. The flexible stripes can be effortlessly cut with scissors, at the designated places, and reused later with a new feed.
Areas of application:
– Event applications
– Medical practices
– Furniture lights
– Private residential construction
– Shop lighting
Product advantages :
– separate control of the color channels
– continuous mixing of the individual colors
– versatile uses
– up to 0.1% dimmable with PWM
Operating voltage: 24 V DC
Max. Power consumption: 26 W / m
Luminous flux: 1400 lm / m
Color temperature: 2850K (WW channel) (7000K when RGB is mixed) Beam
angle: 120 degrees
dimmable: yes, up to 0.1% with corresponding PWM dimmers
Number of LEDs per segment: 6
division: 62.5 mm
Operating temperature: -20 Degrees Celsius to +60 degrees Celsius
storage temperature: -20 degrees Celsius to +60 degrees Celsius
Dimensions: 5000 x 12 x 4 mm
supplies : 24V constant voltage with the highest possible efficiency. Eg Meanwell HLG series.
NOTE: LED Strip must be fed in from both sides and used with a heat sink!
No guarantee for overheating due to insufficient cooling. It must be ensured that a suitable cooling surface is available.