GIRA 208900 S1 interface for remote maintenance, 24 V DC 300 mA REG 2 TE

SKU: 208900 Category:

Description

Gira S1

features
– Secure remote access to the Smart Home with KNX via the Gira HomeServer and Gira X1 app.
– Secure remote access to web-based visualizations.
– Secure remote maintenance and remote programming from the Gira HomeServer, Gira G1, Gira X1, Gira L1 and Gira KNX IP router.
– Secure remote programming via the Gira HomeServer expert.
– Secure remote programming via the Gira Project Assistant (GPA).
– Secure remote maintenance and remote programming of KNX projects using ETS4 or ETS5. Programming and diagnostics are supported via group and bus monitors.
– Secure remote access to HTML pages in the smart home network (e.g. camera, NAS, router, switch).
– Secure data transmission using SSL / TLS encryption.
– Portal server is located in Germany and is subject to German data law.
– Independence from the internet provider and routers used.
– Secure remote access even with IPv6 Dual Stack Lite (e.g. Unitymedia), LTE or UMTS connections.
– Access management of the secured connections via KNX communication objects, Gira X1 app, Gira HomeServer app and QuadClient.
– Status signaling of the secured connections via KNX communication objects, Gira X1 app, Gira HomeServer app and QuadClient.
– Send KNX status reports by email. An attachment can optionally be added to the email.
– Send KNX status messages via SMS or voice call via the chargeable additional service sms77 or MessageBird.
– Optimized KNX IP communication, for mobile and very slow connections.
– Supports accelerated transmission from the ETS to KNXnet / IP devices via a direct KNX IP connection.
– Two RJ45 sockets with switch functionality support the simple looping through of the patch cable.
– Fast and convenient commissioning of the Gira S1 via the Gira device portal.
– 500 MB data volume per month.
– Unlimited usage and 5 years of guaranteed server operation.
– Functional extensions or updates via firmware and software updates.
– Firmware update is carried out via the Gira Project Assistant (GPA).
– Hardware prepared for KNX Secure. Future firmware update required.

Technical data
– Nominal voltage: DC 24 to 30 V
– Power consumption: 2 W
– IP communication: Ethernet 10/100 BaseT (10/100 Mbit / s)

Connections
– IP: 2 x RJ45 sockets
– KNX: Connection and branch terminal
– Ambient temperature : 0 degrees Celsius to +45 degrees Celsius
– KNX: TP1, S-Mode (ETS)
– microSD card: for future use

Notes
– microSD card not included

Reviews

There are no reviews yet.

Be the first to review “GIRA 208900 S1 interface for remote maintenance, 24 V DC 300 mA REG 2 TE”

Your email address will not be published.