ELAUSYS Ajax KNX Gateway

SKU: AJAX-KNX Category:

ELAUSYS The AJAX-KNX connects a compatible Ajax alarm hub to KNX. Monitor group states, power faults, and up to 96 zone statuses while armed over the local network. Optional arm, night-mode, and disarm commands require an Ajax cloud connection and internet access.

Description

The product

Designed for your installation.

Connect your Ajax alarm system to KNX

The Elausys AJAX-KNX makes supported alarm-system information available as KNX group objects. View alarm states alongside other building information and use them in configured automation.

Status information arrives from the hub over the local network. Optional control commands use an Ajax cloud connection and require internet access.

Monitor zones and alarm-system states

Monitor four groups, with six status objects per group: disarmed, armed, night mode, fire alarm, panic alarm, and intrusion alarm. Up to 96 zone statuses are reported while the system is armed. Hub AC-failure and battery-failure statuses are also available.

Zone reporting is limited to events while the system is armed. Group states and power faults remain available.

Use alarm information in building automation

Display alarm information in HyperVisu or another KNX visualisation. For example, use a confirmed armed state to recall an away scene for lighting and heating. Scene responses are configured in the receiving KNX devices.

Arm, night-mode, and disarm commands for up to four groups use an optional Ajax cloud connection and require internet access. Status monitoring uses the hub’s local monitoring-station feed and does not require the cloud connection.

The alarm panel continues to manage its own security functions. The gateway adds integration with the building automation system.

Compatibility and installation

Supported systems: Compatible Ethernet-connected Ajax hubs in the Superior, Fibra, and Baseline lines.

Configure the hub to send its monitoring-station status feed to the gateway on the local network. If commands are required, configure the optional Ajax account connection according to the documentation.

Installation requires a KNX bus connection and the supported alarm-panel interface, plus an external 12–30 VDC power supply. Configure KNX parameters and group addresses in ETS5 or ETS6.

Check the documentation for the required panel settings, supported functions, and installation details.

How to integrate Ajax alarm systems with KNX

KNX alarm gateways — range overview

View documentation and setup instructions

Specifications

ReferenceAJAX-KNX
ManufacturerELAUSYS
Parameter Specification
Product reference AJAX-KNX
Supported alarm systems Compatible Ethernet-connected Ajax hubs in the Superior, Fibra, and Baseline lines
Required panel interface Compatible Ajax hub; optional Ajax account connection for commands
Alarm connection Ethernet, RJ45; local monitoring-station status feed
Building automation interface KNX
Communication direction Local status monitoring; optional cloud commands
Zone monitoring Up to 96 zone statuses, reported while armed
Areas / sections / groups 4 groups
Status information 6 status objects per group
Control commands Arm, night mode, and disarm via optional Ajax cloud connection
Outputs and virtual inputs Group, zone, and power-fault monitoring; optional cloud commands
Scene integration KNX scene recall on configured group-status changes
Expansion Up to 96 zones per gateway
Alarm and fault monitoring Hub AC-failure and battery-failure status
Internet dependency Status monitoring: local network, no internet required; commands: optional Ajax cloud connection, internet required
External power supply 12–30 VDC external, screw terminal
KNX bus current <16 mA at 29 VDC; galvanic isolation from the KNX bus
Housing / dimensions 2-module DIN-rail housing
Mounting 35 mm DIN rail
Operating temperature +5 to +45 °C
Configuration ETS5 / ETS6

Key features

  • Connect compatible Ajax alarm systems to KNX
  • Monitor up to 96 zone statuses while armed
  • Monitor 4 groups with 6 statuses per group
  • Send arm, night-mode, and disarm commands via the optional Ajax cloud connection
  • Receive group states and power faults over the local network
  • Recall KNX scenes from configured alarm-system status changes
  • Configure in ETS5 or ETS6

Documents & support

PDFKNX Gateway for AJAX alarm systems DatasheetProduct document · Opens in a new tabPDFQuick-Start-GuideProduct document · Opens in a new tabPDFSafety-and-Regulatory-Notice-ENProduct document · Opens in a new tab

Reviews

There are no reviews yet.

Be the first to review “ELAUSYS Ajax KNX Gateway”

Your email address will not be published. Required fields are marked *