Description
Binary / Analog Input Module with 6 Thermostat
KNX Binary Input is used to interface the contacts to KNX bus substructure such as push buttons, switches etc. to make them communicating devices. The thermostat feature can be utilized with an internal or external temperature.
Main Functions:
The complete configuration of the device is performed via ETS5 or higher. Depending on ETS configuration and settings, the product feature will be different. Available functions are:
Input Functions:
Switch Sensor
Switch / Dimming Sensor
Shutter Sensor
Value / Forced Operation
Control Scene
RGB Colour Control
RGBW Control
Mode Selection
Command Sequence
Logic Functions
Internal Inputs (max. 6)
Output Types (max. 5 selectable)
External Inputs
Switch
Binary Value (adj. size) (max. 3 selectable)
Dim
Movement
Shutter
Temperature
Alarm
Brightness
Sequence
Scene Number
String
Threshold
Most functions only need one input, and therefore each input might be assigned a different function. However, there are also some functions that can also use two inputs, such as Dimming with 2 buttons and Shutter/Blinds with 2 buttons.
