Z100
Capacitive Touch panel with 10”, 16 million color LCD display and 1280×800 pixel resolution for a integral control of the home, room hotel or any other kind of installation thanks to its 12 fully customizable pages, complying with a timeless and minimalist aesthetic. It includes an ambient luminosity sensor for brightness automatic adjustment as well as a proximity sensor for a quick start when detected activity, which can also launch a configured screensaver. Moreover, it incorporates 2 thermostats and 4 analogue-digital inputs. It has USB and Ethernet ports for program update.
Z50
Color capacitive Touch panel with 5” display and a resolution of 480 x 854 pixels which allows a complete control of the installation thanks to its 12 fully customizable pages while maintaining a minimalist aesthetic. It has 2 analogue-digital inputs, internal temperature probe and 2 independent thermostats. It also incorporates a proximity sensor to detect activity for a quick start, as well as disabling the screensaver if configured.
Z40
Capacitive touch panel with a backlit 4.1″ display, proximity sensor, internal temperature probe and two independent thermostats. 56 control points/buttons divided over 7 pages. The built-in proximity sensor makes the screensaver (image, time and date and/or temperature) appear when the touch panel is not being used and the luminosity sensor adjusts the brightness automatically. 4 analog-digital inputs included to be configured as binary inputs, sensors, push buttons, temperature probes or motion detectors.
Eyezen
Motion detector with luminosity sensor for ceiling mounting, with a detection area of 360º and up to 6 meters diameter. It includes several channels to be configured for constant luminosity regulation, lighting switching control according to luminosity threshold or according to motion detection only. Sensor sensitivity settings can be adjusted and luminosity can be calibrated to the working environment values. Master/slave configuration allows using several detectors for larger areas
Flat Sensato V2
KNX Humidity and temperature sensor for flush mounting with a flat design. It measures ambient temperature, relative humidity and calculates dew-point, so that it can send alarms for humidity, temperature and condensation. The LED indicator shows the current relative humidity status. It includes 10 logical functions and 2 analog-digital inputs, which can be configured as binary inputs for sensors and potential free push buttons, as temperature probe inputs or as motion sensor inputs.
MAXinBOX 24 v2
Multifunction actuator for DIN-rail (12 units) that offers multiple configurations of up to 12 shutter channels, up to 24 independent outputs of 16 A (capacitive loads supported) and up to 6 blocks of 2-pipes fan coil controller. It allows manual control of its outputs thanks to the push buttons on the cover. LED indicators can show the status of its outputs. It includes 30 independent logical functions to enlarge the versatility of the automations in KNX system. Accessories: AC/DC shutter adapters.
ALLinBOX 1612 v2
The starting point for most projects incorporating control and monitoring functionalities. Multifunction device that integrates a 640 mA KNX power supply, KNX-IP Interface, 4 independent thermostats, logical module, 12 analog/digital inputs and 16 relay outputs (16 A C-Load) in only 12 DIN rail units. Offers multiple configuration options as individual outputs, shutter channels or fan coil controller (2/4 pipes).
NarrowDIM X4
Universal dimming actuator (RLC, LED, CFL*) for DIN-rail mounting (2 units) with 2 channels for up to 210 W at 230 V AC (160 W at 110 V AC). It allows double channel connection, up to 400 W at 230 V AC (300 W at 110 V AC). Auto load type detection (RLC). Configurable dimming curves for LED and CFL. It allows manual control of its outputs using the push buttons. It includes 10 independent logical functions. Error detection: short circuit, voltage surge, overheating, anomalous frequency, power failure, parameterization error.
Lumento DX4 v2
LED dimmer with 4 channels designed for LED technology, featuring constant voltage regulation and DIN-rail mounting (4.5 units). The dimming channels can be configured as combinable independent channels, an RGBW channel, RGB+W channels, and combinable TW channels. Additionally, it includes a relay output (16 A) to control the LED power supply or for independent use, as well as manual test buttons to check the functioning of the channels.
KLIC-DI v2
Zennio gateway to control Daikin commercial and industrial air-conditioning units from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions. 2 DIN rail units. Accessories: temperature probe and motion sensor.
ZENNIO GATEWAYS ARE AVAILIBLE FOR MOST MAJOR HEATPUMP BRAND
DALI BOX 64 v3
KNX-DALI Interface for DIN-rail (4.5 units) to control up to 64 DALI independent ballasts, which can be associated in up to 64 groups. It includes a display and ETS DCA for easily addressing when a ballast is replaced, that also helps assigning ballasts to groups. Error indicators for each ballast.
